Rectangular Steel Backboard
1. BACKBOARD - Backboard shall be 42"x72" rectangular steel. Skin shall be 10 gauge and rear structure shall be ¼" and 10 gauge material. All formed corners and edges shall be fully welded and ground for safety. Rear structure shall allow for mounting to industry standard 36"x62" spacing. Rear mounting structure shall be constructed as to allow paint to coat entire backside of board to prevent rust "streaking" down backside of board. The backboard shall be coated with white powder coat and have an official size shooters square. Backboard shall accept rims with a 5"x5" hole pattern and be manufactured in the USA. Backboard shall carry a 10-Year Superior Warranty and a total shipping weight of approximately 150#.