FT240 Unbreakable Conversion Short
1. BACKBOARD - Backboard shall be constructed of ½" thick tempered glass with an official white shooter's square and border and shall have a 5"x4" goal mounting pattern. Frame shall be aluminum extrusion held together in the corners by means of corner brackets. Rear structure shall provide for industry standard 20"x35" mounting. A fabricated steel support structure shall be mounted into the rear side of the backboard to facilitate mounting to ceiling or wall structures where fan-shaped backboards previously existed. Steel spacers shall protrude through large holes in the glass for rim mounting. At no time shall the rim be allowed to contact the glass during play when up to 1000 lbs. Of pressure is applied to the rim. Backboard shall carry a Lifetime Superior Warranty. Backboard shall meet all NCAA and National Federation of State High School Associations standards. Frame shall be pre-drilled for First Team Model FT72C TuffGuard Backboard Padding. Backboard shall carry a Lifetime Superior Warranty. Approximate shipping weight shall be 230#.