FT239 Standard Conversion Short Glass
1. BACKBOARD - Backboard shall be constructed of ½" thick tempered glass with an official white shooter's square and border and shall have a 5"x4" goal mounting pattern. Frame shall be aluminum extrusion held together in the corners by means of corner brackets. Rear structure shall provide for industry standard 20"x35" mounting. At the rim mounting location, glass shall be sandwiched between two cushioned steel plates. Top rim mounting bolts shall pass through tubular steel bushings. Forward facing, lower rim mounting studs are pre-mounted into steel faceplate on board. Rear structure shall be designed to allow backboard to be mounted to structures where fan-shaped boards previously existed. Backboard shall meet all NCAA and National Federation of State High School Associations standards. Frame shall be pre-drilled for First Team Model FT72C TuffGuard Backboard Padding. Backboard shall carry a 10-Year Limited Warranty. Shipping weight shall be approximately 220#.