Basketball Scoreboards
2650-4 BASKETBALL SCOREBOARD SPECIFICATIONS
GENERAL: This ETL listed four sided scoreboard includes four scoreboard cabinets, four corner pieces, assembly hardware, control console, control cable (sold separately), 10 ft. extension cable, three 25 ft. extension cables, and junction box.
DIMENSIONS: Approximately 13’ square at the top x 36" H x 6" D (2650-4 with side sponsor panel measures approximately 17’ square at the top L x 36" H x 6" D)
WEIGHT: 840 lbs (2650-4 with side sponsor panel weighs 960 lbs)
SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum. Internal structural parts may be extruded aluminum or formed from aluminum sheet. The face and back are made from aluminum sheet. The face is finished with enamel paint. Black is the standard face color. White is the standard color for the sponsor panel and captions.
DISPLAY: The 2650-4 basketball scoreboard displays HOME and GUEST scores to 199, a 99:00 clock with 1/10th of a second timing, PERIODS to 4, HOME and GUEST bonus and possession symbols, HOME and GUEST team fouls, PLAYER NUMBER and FOULS on each side. Each side has an internal horn.
DIGITS AND SYMBOLS: Light emitting diodes mounted on printed circuit boards form the digits and symbols. The clock is formed with 12" red digits, the HOME and GUEST scores are formed with 12" yellow digits, the PERIOD, PLAYER NUMBER and FOULS are formed with 9" green digits, the HOME and GUEST team fouls are formed with 9" yellow digits, bonus symbols are green, the possession symbols and colon / decimal symbols are red.
SCOREBOARD ELECTRONICS: 100% solid state fully enclosed.
CONTROL CONSOLE: The microprocessor control console is constructed of a rugged plastic housing with a metal back plate. It features a 37 key sealed membrane keypad, a LCD display of game information, an attached 6 foot power cord, and a lithium cell battery backup to retain game information.CONTROL CABLE: The cable has two 22 AWG stranded copper conductors with semi-rigid PVC insulation. It also has a braided shield and a foil shield. The polyethylene jacket is rated at 300 volts. The cable measures approximately ¼" in diameter. One length is required to run from the scoreboard to the point of operation.
JUNCTION BOX AND EXTENSION CABLE: A 4 ¼" x 2 ¼" x 2" junction box with a stereo jack mounted on the face is attached to the control cable at the point of operation. A ten foot extension cable connects the control console to the junction box.
WARRANTY: Five year limited warranty.
SCOREBOARD INSTALLATION
This scoreboard is designed for indoor use only. The scoreboard arrives in eight sections: four scoreboard cabinets and four corner pieces. Two eyebolts are attached to the top of each cabinet. The assembled unit is designed to be suspended from cables attached to these eight eyebolts. The mounting bolts and washers necessary to attach the corners are provided with the scoreboard. Installation of the scoreboard consists of joining the four scoreboard cabinets at the corners using the provided hardware, hanging the assembled scoreboard in the air at the desired height and making the proper electrical connections.
- Each corner piece and scoreboard cabinet has numbers written on the rear panel. It is necessary to attach each corner piece to a cabinet side that has an identical number.
- Each corner bracket has a black face panel attached by some hex head screws. Remove the face panel from a corner bracket.
- Align the corner bracket with one of the scoreboard cabinet sides. The widest part of the corner bracket should be aligned with the top of the scoreboard cabinet. Note: This scoreboard is designed to be angled downward. It will to tilt the scoreboard cabinets to align them with the corner brackets.
- Insert a small washer over a bolt.
- Insert a larger washer over the bolt.
- Pass the bolt through one of the holes inside the corner bracket and thread it into the threaded hole provided in the side of the scoreboard cabinet.
- Install the other three bolts to the scoreboard cabinet in the same manner.
- Attach another scoreboard cabinet to the other side of the corner bracket in the same manner.
- Reinstall the corner bracket face panel.
- Repeat this process until all the scoreboard cabinets are joined together at the corners with the brackets.
- Connect your chains or cables to the eyebolts of the assembled scoreboard.
- Raise the scoreboard into the air and secure the chains or cables.
Indoor & Outdoor Sports Equipment of Superior Quality
Gymnasium Basketball Equipment | Outdoor Basketball Systems | Playground/Residential Backboards
Playground/Residential Goals | Basketball Accessories | Additional Information
Basketball-Goals.com is PARS Sports Equipment Company